High Frequency Spark Test Machine

High Frequency Spark Test Machine

Specifications:

Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s)

The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.

The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.

The Sine Wave Spark Tester is quality-assured to meet your needs.

Basic Function

· Fast recovery time after fault (0.1 second).

· Occupies short space in line and with improvement factor of 50 compared to

· traditional CT power frequency electrode.

· Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading

· Output Control: Front Panel Reset in Manual Mode. Closure time is selectable

· 0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all

· wire faults detected.

· Limits the fault current without damaging the test equipment.

· Short exposure time to corona does not degrade nor damage good insulation.

· Distinguishes all wire faults and detects bare wire.

· Safety Switch interlock.

Basic Specification:

-Warehouse and office